Wash or decontaminate your hands. (Risk assess PPE according to local policy).
Always wipe from clean to dirty.
You’ll need approximately 2-3 wipes. Should your wipe dry out or become soiled, replace it with a new wipe. Do not re-wet the wipe.
Begin cleaning where the cable enters the system baseplate on the wall, wiping down towards the handset, including any clips along the cable.
Wipe the front side of the handset, followed by the back.
Ensure that all switches and knobs are not missed during cleaning.
Using a new wipe, clean any brackets that might be used to hold the call bell.
Leave all equipment to air dry, allowing sufficient contact time with the disinfectant.
Dispose of cleaning wipes as per local protocol.
Remove PPE, wash or decontaminate hands and if required complete a record of cleaning, as per your local protocols.